DATASHEET
Display
Through-hole
ELT-511SYGWA/S530-E2
6
Copyright ? 2010, Everlight All Rights Reserved. Release Date : Feb. 17, 2014 Issue No : DDF-0001960 Rev.2
www.everlight.com
Application Restrictions
1. Specification described in this document. Above specification may be changed without notice. EVERLIGHT will
reserve authority on material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for using
outlined in
these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the
product which does not comply with the absolute maximum ratings and the instructions included in these
specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT Corporation. Please don’t
reproduce or cause anyone to reproduce them without
EVERLIGHT’s consent.
4. ESD (Electrostatic Discharge)
The products are sensitive to static electricity o
r surge voltage. ESD can damage a die and its reliability.
When handling the products, the following measures against electrostatic discharge are strongly
recommended:
Eliminating the charge
Grounded wrist strap, ESD footwear, clothes, and floors
Grounded workstation equipment and tools
ESD table/shelf mat made of conductive materials
Proper grounding is required for all devices, equi
pment, and machinery used in product assembly.
Surge protection should be considered when designing of commercial products.
If tools or equipment contain insulating materials
such as glass or plastic,
the following measures against electrostatic discharge are strongly recommended:
Dissipating static charge with conductive materials
Preventing charge generation with moisture
Neutralizing the charge with ionizers
5.
The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not
subjected to forward or reverse voltage while it is
off. If reverse voltage is continuously applied to
the LEDs, it may
cause migration resul
ting in LED damage.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
ELYI-K52C5-0LPGS-P6500
LED YI MULTI 5W COOL WHT SMD
EMN11T2R
DIODE SWITCH 80V 100MA HS EMD6
EMP11T2R
DIODE SWITCH 80V 100MA HS EMD6
EN11-HSB1AF15
ENCODER 11MM ROTARY SW TOP ADJ
EN12-HS11AF25
ENCODER 12MM ROTARY SW TOP ADJ
EN16-V22AF15
ENCODER 16MM ROTARY SIDE ADJ PCB
EVE-KD2F3024M
ENCODER ROTARY 12MM VERT 24PPR
F10A-0102
TOUCH DISPL FUSION 10 10.1" PCAP
相关代理商/技术参数
ELT511SYGWA/S530-E2
制造商:Everlight Electronics Co 功能描述:
ELT-511SYGWA-S530-E2
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:0.56 TRIPLE DIGIT DISPLAYS
ELT-511USOWA
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:0.56 Triple Digit Displays
ELT-511USOWA/S530-A3
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:0.56 Triple Digit Displays
ELT-511USOWA/S530-A4
功能描述:LCD 数值显示模块 Triple Digit Display RoHS:否 制造商:Lumex 显示模式:Reflective 数位数量:4 字符计数 x 行:4 x 1 字符大小:0.71 in 流体类型:TN 背景色:Gray 封装:
ELT511USOWA/S530-A4
制造商:Everlight Electronics Co 功能描述:TRIPLE DIGIT DISPLAY SUPER-ORANGE ALLNGAP - Rail/Tube
ELT-511UYOWA
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:0.56 Triple Digit Displays
ELT-511UYOWA/S530-A3
制造商:EVERLIGHT 制造商全称:Everlight Electronics Co., Ltd 功能描述:0.56 Triple Digit Displays